Assembly Stage

• Install tail module. Make sure to route all necessary cables
• Install Avionics+Cabin module. Allign all bolts correctly and ensure no cable is caught between bolts & frame
• Install 8 nuts in the rear of the vehicle. All 4 bolts must be double nut installed to prevent nuts from coming loose
• Install both wings. Double check cables
• Install wing retaining bolts
• Install 4 nuts to secure cabin bay door

Pre-Flight stage

• Do a overall check of the vehicle. Check for any fractures or parts with compromised integrity
• Double check all cables. Ensure no servo plug is installed backwards
• Ensure all props are removed
• Connect battery and ensure good telemetry link & RC connection
• Arm the vehicle in MC mode. Check motor directions and tilt servos for yaw control
• Transition vehicle to FW mode. Ensure all motors tilt forward, and control surfaces move via rc commands.
• Ensure control surfaces move in response to roll & pitch of the vehicle in stabilized mode
• Transition back to MC mode, disarm and unplug battery
• Install props. Double check prop direction and screw torque
• Reinstall battery and install battery cover
• Arm the vehicle in MC mode and test hover