Assembly Stage

1. Tail module, route cables
2. Avionics + Cabin module
3. 8 nuts in the rear (double nuts for 4 bolts)
4. Wings, check cables
5. Wing retaining bolts
6. Cabin bay doors secure

Pre-Flight stage

1. Structural integrity check
2. Cables check, servo plug orientation check
3. REMOVE PROPS
4. Connect battery
5. Telemetry and RC link check
6. Ensure PROPS REMOVED then arm vehicle
7. Check motor directions, tilt servos for yaw control
8. FW mode transition, check motor tilt and control surfaces movement
9. IMU Check (control surfaces respond to roll & pitch)
10. Back to MC mode, disarm
11. Unplug BAT